Qlogic SANbox 1400 Series Installation Manual page 54

4 – Installation
Installing a Switch
For a Linux platform:
Open the CD and run the installation program with the following path:
Switch_Manager/Linux_5.00.xx.bin
If there is no CD-ROM icon, do the following:
1. Open an xterm or other terminal window.
2. Mount the CD-ROM. From a shell prompt, enter the following command:
3. Change directory to location of the install program:
4. Enter the following command to make the install file executable:
5. Execute the install program and follow the installation instructions:
For a Solaris platform:
1. Open a terminal window. If the disk isn't already mounted, enter the
following command:
2. Move to the directory on the disk that contains the executable. Enter the
following command:
3. Add the package and follow the SANsurfer Switch Manager installation
instructions. Enter the following command:
For a MacOS X platform:
1. Open the CD and move to the following folder:
2. Double click the application zip file (MacOSX_5.00.xx.zip). This will place
the install program on your desktop.
3. Locate the Install program icon on your desktop, execute it, and follow the
installation instructions.
4-8
mount /mnt/cdrom
cd /mnt/cdrom/Switch_Manager/Linux
chmod +x Linux_5.00.xx.bin
./Linux_5.00.xx.bin
volcheck
cd /cdrom/cdrom0/Switch_Manager
Solaris_5.00.xx.bin
Switch_Manager
S
59225-00 B