Qlogic SANbox 1400 Series Installation Manual page 184

B – Command Line Interface
User Command
Notes
Authority level or password changes that you make to an account that is currently
logged in do not take effect until that account logs in again.
Examples
The following is an example of the User Accounts command:
SANbox (admin) #> user accounts
Current list of user accounts
-----------------------------
images
admin
chuckca
gregj
fred
The following is an example of the User Add command:
SANbox (admin) #> user add
Press 'q' and the ENTER key to abort this command.
account name (1-15 chars)
account password (4-20 chars)
please confirm account password: *******
set account expiration in days (0-2000, 0=never): [0] 100
should this account have admin authority? (y/n): [n] y
OK to add user account 'user1' with admin authority
and to expire in 100 days?
Please confirm (y/n): [n] y
The following is an example of the User Edit command:
SB211.192 (admin) #> user edit
Press 'q' and the ENTER key to abort this command.
account name (1-15 chars)
set account expiration in days (0-2000, 0=never): [0]
should this account have admin authority? (y/n): [n]
OK to modify user account 'user1' with no admin authority
and to expire in 0 days?
Please confirm (y/n): [n]
B-96
(admin authority = False, never expires)
(admin authority = True , never expires)
(admin authority = False, expires in < 50 days)
(admin authority = True , expires in < 100 days)
(admin authority = True , never expires)
: user1
: *******
: user1
S
59225-00 B