Mount The Switch - Qlogic SANbox 5600 Series Installation Manual

4 – Installation
Installing a Switch

Mount the Switch

The switch can be placed on a flat surface and stacked or mounted in a 19"
Electronics Industry Association (EIA) rack. Refer to
weight and dimensional specifications. Adhesive rubber feet are provided for
surface mounts. Without the rubber feet, the switch occupies 1U of space in an
EIA rack.
A model 5600 switch can be rack mounted without rails, however, rail kits
are available from General Devices™ Company, model number C-874:
A model 5602 switch requires a QLogic rail kit (part number SB-RACKKIT)
for rack mounting.
WARNING!!
Mount switches in the rack so that the weight is distributed evenly. An
unevenly loaded rack can become unstable possibly resulting in equipment
damage or personal injury.
AVERTISSEMENT!!
Installer les commutateurs dans l'armoire informatique de sorte que le poids
soit réparti uniformément. Une armoire informatique déséquilibré risque
d'entraîner des blessures ou d'endommager l'équipement.
WARNUNG!!
Switches so in das Rack einbauen, dass das Gewicht gleichmäßig verteilt
ist. Ein Rack mit ungleichmäßiger Gewichtsverteilung kann
schwanken/umfallen und Gerätbeschädigung oder Verletzung verursachen
¡ADVERTENCIA!
Monte los conmutadores en el estante de modo que el peso se distribuya de
manera uniforme. Un estante cuya carga no esté distribuida de manera
uniforme puede ser inestable y podría dañar el equipo o causar lesiones
personales.
4-4
General Devices Company, LTD.
P.O. Box 39100
Indianapolis, IN 46239-0100
317-897-7000
www.generaldevices.com
S
"Dimensions" on page A-5
59096-06 A
for