Qlogic SANbox 5600 Series Installation Manual page 111

A
Number of Fibre Channel Ports.....
Scalability ......................................
Maximum User Ports .....................
Buffer Credits.................................
Media Type
Ports 0-15......................................
Ports 16-19....................................
Fabric Port Speed
Ports 0-15......................................
Ports 16-19....................................
Maximum Frame Size ...................
System Processor .........................
Fabric Latency (intra-switch)
1-Gbps to 1-Gbps ..........................
2-Gbps to 2-Gbps ..........................
4-Gbps to 4-Gbps ..........................
10-Gbps to 10-Gbps ......................
Bandwidth
Point-to-Point ................................
Aggregate (single switch) ..............
59096-06 A
Table A-1. Fabric Specifications (Continued)
Variable and can be upgraded in the
following configurations:
8, 12, or 16 SFP Fibre Channel ports
or
16 SFP Fibre Channel ports plus
4 XPAK ports
Maximum 239 switches depending on
configuration
> 475,000 ports depending on
configuration
16 buffer credits per port, ASIC embedded
memory
SFP optical transceiver
XPAK switch stacking cables
1.0625, 2.125, or 4.250-Gbps
12.750 Gbps
2148 bytes (2112 byte payload)
200 MHz Motorola® 8245 PowerPc®
< 0.6 µsec
< 0.4 µsec
< 0.3 µsec
< 0.2 µsec
212 MB, Full Duplex @ 1-Gbps
224 MB, Full Duplex @ 2-Gbps
850 MB, Full Duplex @ 4-Gbps
2550 MB, Full Duplex @ 10-Gbps
Up to 23.80 GB Full Duplex
A – Specifications
Fabric Specifications
1
A-3