Diagnostics/Troubleshooting; Chassis Diagnostics; Chassis Leds - Qlogic SANbox 5600 Series Installation Manual

5

Diagnostics/Troubleshooting

Diagnostic information about the switch is available through the chassis LEDs and
the port LEDs. Diagnostic information is also available through the CLI,
QuickTools, or Enterprise Fabric Suite 2007 event logs and error displays. This
section describes the following types of diagnostics:

Chassis Diagnostics

indications.
Power-On Self Test Diagnostics
Logged-In LED indications.
Power Supply Diagnostics
Supply Fault LED indications for model 5602 switches.
This section also describes using maintenance mode to recover a disabled switch.
Chassis Diagnostics
Figure 5-1shows the chassis LEDs on a model 5600 switch; the model 5602
switch is similar.
59096-06 A
describes the Input Power LED and System Fault LED
describes Power Supply Status LED and Power
System Fault LED
(Amber)
Figure 5-1 Chassis LEDs
describe the Heartbeat LED and the port
Input Power LED
(Green)
Maintenance Button
Heartbeat LED
(Green)
5-1