Power Supply - Foxconn 865A01 series User Manual

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connect-
ing the power supply.
ATX 12V Power Connector: CN11
The 4 pin ATX 12V power supply connects to CN11 and provides power to the
CPU.
ATX Power Connector: CN25
CN25 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is
secure.
Attention:
You have to press the power button for more than four seconds if you
change the default Instant-off setting to "Delay 4 Sec" for the soft-off
by Power Button option in the BIOS Power Management Setup.
865A01-FOXCONN-V1.3-EN-121603.p65
Chapter 2 Installation Instructions
ATX 20-pin Power Connector
865A01 G/PE User Manual
21
ATX 12V Power Connector
2 4
12V
G N D
12V
GND
1 3
5V G N D GND GND
5 V
-5V GND PS-ON -12V
20
10
1 2 V Pw-OK 5V 5V 3.3V
5 V S B GND GND G N D
2004-5-27, 18:02
3 . 3 V
11
1
3.3V
21