Power Supply - Foxconn 875A02 Manual

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
ATX 12V Power Connector: PWR2
The 4 pin ATX 12V power supply connects to PWR2 and provides power to the
CPU.
ATX Power Connector: PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is secure.
Attention:
You have to press the power button for more than four seconds if you
change the default Instant-off setting to "Delay 4 Sec" for the soft-off
by Power Button option in the BIOS Power Management Setup.
Chapter 2 Installation Instructions
ATX 12V Power Connector
G N D
GND
ATX 20-pin Power Connector
3.3V
1
11
3 . 3 V
875A02 User Manual
2 4
12V
12V
1 3
G N D GND GND 5V_SB
3.3V 5V 5V Pw-OK 1 2 V
GND
-12V PS-ON
5 V
NC
GND G N D
5V
GND
10
20
21