Foxconn 865A01 series User Manual page 58

Security Option (Default: Setup)
When it is set to Setup, a password is required to enter the CMOS Setup
screen; When it is set to System, a password is required not only to enter
CMOS Setup, but also to startup your PC, as well.
APIC Mode (Default: Enabled)
This option is used to open or lock the APIC mode built into the chipset.
The available setting values are: Disabled and Enabled.
MPS Version Control For OS (Default: 1.4)
This option is used to set up the version of MPS Table used in NT4.0 OS.
OS Select for DRAM>64MB (Default: Non-OS2)
With it set to Non-OS/2, you cannot execute the OS/2 in the system with the
memory > 64MB; with OS/2 selected, you are allowed to execute the OS/2
in the system with the memory > 64MB.
Report No FDD for WIN95 (Default: No)
FDD Set whether BIOS reports Windows95 or not loading floppy disk drive.
The available setting values are: No and Yes.
Small Logo (EPA) Show (Default: Disabled)
Determines whether the small logo (EPA) will be displayed during system
startup. The available setting values are: Disabled and Enabled.
50
865A01-FOXCONN-V1.3-EN-121603.p65
Chapter 3 BIOS Description
865A01 G/PE User Manual
50 2004-5-27, 18:02