Foxconn 865A01 series User Manual page 41

Audio Header: FP AUDIO
The audio port includes two parts – the Front Audio and Rear Audio. Their
priority is sequenced from high to low (Front Audio to Rear Audio). If head-
phones are plugged into the front panel of the chassis (using the Front
Audio), then the Speaker Out (Rear Audio) on the rear panel will not work. If
you do not want to use the Front Audio, pin 5 , 6, 9 and 10 must be short
connected, and then the signal will be sent to the rear audio port.
Connecting the SPDIF/6CH_BRACKET
The SPDIF/6CH_BRACKET output is capable of providing digital or 6 chan-
nel audio to external speakers, or compressed AC3 data to an external Dolby
digital decoder. The motherboard is equipped with one bracket.
Attention:
The empty pin of the SPDIF cable should be aligned to pin 9
on the SPDIF/6CH_BRACKET.
865A01-FOXCONN-V1.3-EN-121603.p65
Chapter 2 Installation Instructions
MIC_VCC
R_OUT
L_OUT
865A01 G/PE User Manual
33
1 2
MIC AGND
A5V
FR_OUT
NA
Empty
FL_OUT
9 10
Front Audio
2
1
SL_OUT
CEN_OUT
GND
SPDIF_OUT
SPDIF_IN
9
10
S P D I F C A B L E
6CH_BRACKET
2004-5-27, 18:02
SR_OUT
LEFOUT
NA
VCC
AGND
33