Foxconn 865A01 series User Manual page 87

2).Use 4-/6- Channel Audio Functions
After installing the driver, you can use the 4-/6- channel functions. First,
connect 4 or 6 speakers corresponding to the audio interfaces and then
select the 4 or 6 audio settings in the software.
Connect Audio Box
In order to use the multi-channel function, you must connect several
speakers to the system. You must connect the same number of speakers
as channels selected in the software. The audio interface on the rear
panel can only support 2-channel analog
you select the correct settings in the software, the audio interface on the
rear panel automatically changes into a 4-/6- channel analog audio
interface. Please refer to "How to Select 4- or 6- Channel Setting" at the
end of this chapter for more setting information.
Ensure all speakers are connected to the Line Out interfaces. Use the
interface on the rear panel to use 2-, 4- and 6- channel configuration,
described as follows.
2-Channel Analog Audio Interface
Line Out (front channels)
Description: all Line Out, Line In and Microphone functions exist in 2-
channel mode.
4-Channel Analog Audio Interface
Line Out (front channels)
Description: in the 4-channel setting, Line In is changed to Line Out function.
865A01-FOXCONN-V1.3-EN-121603.p65
Chapter 4 Driver CD Introduction
Line Out (rear channels)
865A01 G/PE User Manual
79
audio output function. When
Line In
Microphone
Microphone
2004-5-27, 18:03
79