Integrated Peripherals - Foxconn 865A01 series User Manual

Integrated Peripherals

Use the arrow keys to select your options; press the <Enter> key to enter the
setup menu. The options and setting methods are discussed below:
IDE HDD Block Mode (Default: Enabled)
This option is used to set whether the IDE HDD Block Mode is allowed.
The available setting values are: Disabled and Enabled.
IDE DMA transfer access (Default: Enabled)
This option is used to set up the IDE transfer access—with it set to Enabled,
the IDE Transfer Access uses the DMA mode; with it set to Disabled, the IDE
Transfer Access uses the PIO mode
On-Chip Primary PCI IDE (Default: Enabled)
This option is used to set whether the On-chip Primary PCI IDE interface is
used. The available setting values are: Disabled and Enabled.
IDE Primary Master/Slave PIO (Default: Auto)
This option is used to set the PIO transfer mode under the IDE Primary
Master/Slave Controller. PIO transfer mode options include Auto/0/1/2/3/4.
Set the transfer mode according to the IDE specification. It is recommended
to set it to Auto for the auto-test by BIOS.
865A01-FOXCONN-V1.3-EN-121603.p65
Chapter 3 BIOS Description
Integrated Peripherals Menu
Onchip IDE Menu
865A01 G/PE User Manual
53
53
2004-5-27, 18:02