Front Panel Connector: CN41
This motherboard includes one connector for connecting the front panel
switch and LED indicator.
HDD-LED Connector
Attach the connector to the HDD-LED on the front panel of the case; the LED
will flash while the HDD is in operation.
Reset Switch
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
PWR-LED Connector
Attach the connector to the power LED on the front panel of the case. The
Power LED indicates the power supply status, and will be lit during normal
system operation. The Power LED will blink while the system is in the S1
mode, and will be turned off when the system is in either S3 or S5 mode.
865A01-FOXCONN-V1.3-EN-121603.p65
Chapter 2 Installation Instructions
865A01 G/PE User Manual
25
IDE 1(Primary IDE Interface)
IDE2 (Secondary
IDE Interface)
1
2
P W R - L E D
HD-LED
RESET
NC
9
10
2004-5-27, 18:02
P W R - S W
25