Fluke ESA601 Operator's Manual page 71

COMMAND PARAMETERS
FUNCT= ENCL_LEAK
FUNCT= PAT_LEAK
FUNCT= PAT_ AUX
FUNCT= MAP
FUNCT= VDE_DEV_LEAK
FUNCT= VDE_PAT_LEAK
FUNCT= DIF_CUR
FUNCT= DUAL_LEAK
FUNCT= DUAL_VOLTS
PART= RA
LA
RL
LL
V1
V2
V3
V4
V5
V6
ALL
MAP= NORM
OFF
REV
NEUT= OPEN
CLOSED
EARTH= OPEN
CLOSED
EO_POL= NORM
REV
OHMS= NULL
OFF
RES
LOAD= AAMI
IEC
(no parameters)
LANGUAGE
Table 6-1. Remote Control Commands (cont.)
Switches to the Enclosure-Leakage-Current test.
Switches to the Patient-Leakage-Current test.
Switches to the Patient-Auxiliary-Leakage-Current test.
Switches to the Mains-on-Applied-Parts-Leakage-Current test.
Switches to the VDE: Equivalent-Device-Leakage-Current test.
Switches to the VDE: Equivalent-Patient-Leakage-Current test.
Switches to the VDE: Differential-Current test.
Switches to the Dual-Lead-Leakage-Current test.
AC - BLACK jack to RED jack
Switches to a selected, or all, applied part(s).
Switches to M.A.P. polarity.
Switches to AC Neutral to Equipment Outlet.
Switches to Physical Earth (PE).
Switches to Equipment Outlet Polarity.
Switches to OHMS function.
Switches to LOAD-SELECTION function.
Will return the selected language. Possible responses are;
"US ENGLISH", "ENGLISH", "FRENCH", "ITALIAN", "GERMAN".
Remote Control
Remote Control Commands
ACTION
6
6-5