Back Panel - Fluke ESA601 Operator's Manual

No.
-
19
LOAD
20 RS-232 Port

Back Panel

The back panel of the ESA601 features a full set of universal ECG jacks for connecting
applied parts. Figure 1-2 shows the IEC nomenclature and Figure 1-3, the AAMI
nomenclature. AHA and IEC color-coded dots label the jacks as an aid to connecting the
corresponding U.S. and international ECG leads. Table 1-3 indentifies the use of each
ECG jack.
Figure 1-2. Top and Side Panel Features (cont.)
Name
SELECTION SWITCH
R N
AP1 AP2
C2 C3
AP6 AP7
Figure 1-2. Back Panel View of the ESA601 (IEC)
RA RL
V2 V3
Figure 1-3. Back Panel View of ESA601 (AAMI)
Description
A slide switch, which permits the selection of either
the ANSI / AAMI ES1 or the IEC 60601-1 patient
load
A serial interface, which, in Remote Mode, enables
remote operation of the ESA601, and provides a
download port for processor firmware. In Local
Mode, this port can be used to output test results to a
serial ASCII printer when the PRINT SWITCH is
pressed.
L F C1
AP3 AP4 AP5
C4 C5 C6
AP8 AP9 AP10
LA LL V1
V4 V5 V6
General Information
ESA Characteristics
ayr02f.eps
ayr03f.eps
1
1-9