Fluke ESA601 Operator's Manual page 59

Action
1. Connect the banana plug end of the RED test lead into the RED signal jack, and the
probe end of the RED test lead to the DUT enclosure; connect the DUT applied parts
to the applied-parts jacks on the ESA601; connect the DUT power cord to the test
receptacle on the ESA601.
2. Position the
3. Position the
4. Depress and hold down the
in the
NORMAL
5. After the meter settles, release the switch to hold and display the reading and/or press
the
PRINT SWITCH
6. Depress and hold down the
7. After the meter settles, release the switch to hold and display the reading and/or press
the
PRINT SWITCH
(or
APPLIED PARTS ECG LEADS
-
FUNCTION SELECTION KNOB
. . ./
M A P VDE EQUIV
position.
to print the reading.
. . ./
M A P VDE EQUIV SWITCH
to print the reading.
Performing Electrical-Safety Tests
) selector knob to
ALL
to : .
VDE EQUIV DEVICE
/ ( /
INSUL ISO VDE EQUIV
in the
REVERSE
Local Control
.
/ )
INSUL SWITCH
position.
5
5-25