1735
Users Manual
Current (I)
Angle ( )
for all three phases (L1, L2, L3).
Measurement
If you select the measuring mode with the rotary switch the following figure
appears on the display. The three phase voltages and current values are plotted
for the time of one period.
21 Switch between the individual phases or total view of all phases (as
shown in figure).
4 5 While viewing the individual phases, the cursor can be shifted and the
value at this location is displayed.
In the individual view, the
With Hold/Run the momentary values "freeze" and the measurement is
stopped or started again.
Save
With Save/Enter you will get a screenshot and thus store the actual display in
the memory location shown subsequently.
40
angle is also shown.
edx033.bmp