When the recorder graphics reach the screen margin during recording, a picture
of this screen is saved.
The display is then deleted and the recording is continued. Up to 6 auto screens
are saved in the course of a recording. The saved screenshots can be retrieved
via the View Auto Screenshots menu.
You can exit a measurement with HOLD, however, the measurement cannot be
continued afterwards. In order to evaluate the measurement values of the
recorder function:
Use the Cursor key. Using the cursor control keys, select the respective time
and read the corresponding measurement value.
Logging
In Logging mode, the following values are recorded for every phase (L1, L2,
L3)
Voltages (V) and
Currents (I)
THD V
THD I
Values of uneven harmonics from 1-25 for V and I
Frequency
These values can be recorded in the instrument, downloaded and evaluated
with Power Log software package
Save
With Save/Enter you will get a screenshot and thus store the actual display in
the memory location shown subsequently.
Scope
Select Scope with the rotary switch.
In this measuring mode you get a live picture of the waveforms of
Voltage (V)
Power Logger
Measuring Functions
39