Inside The Logger; Line Power Or Battery Mode - Fluke 1735 User Manual

1735
Users Manual
Table 4. Maximum Possible Measuring Periods
Measurement
Function
V/A/Hz,
Harmonics,
Power

Inside the Logger

Line Power or Battery Mode

You can operate the Logger continuously with the provided charging adapter
or for a few hours with the built-in battery. The battery is to ride through
power interruptions during logging sessions, and to provide operating power
during handheld troubleshooting and analysis of signals.
If you operate your Logger with the ac adapter, the battery is charged
automatically. On the display the symbol for "plugged-in" or battery is
displayed accordingly.
If the battery is completely discharged, it takes about 4 hours to charge it
completely. It is impossible to overcharge the battery as the Logger has an
automatic charging circuit.
When LO-BAT is indicated, attach the ac adapter to recharge the battery.
46
Average Interval
1 sec
2 sec
5 sec
10 sec
30 sec
1 min
5 min
10 min
15 min
Recording Time
1 hour, 12 minutes
2 hours, 24 minutes
6 hours
12 hours
1 day, 12 hours
3 days
15 days
30 days
45 days