Instrument Setup; Current Probes - Fluke 1735 User Manual

1735
Users Manual

Instrument Setup

In this menu option you can make adjustments in the submenu for:

Current Probes

Voltage Transformers
Phase Identification
Backlight
Version and Calibration
These are described individually in the following:
Current Probes
When a Flexi set or Current Probe is connected to the instrument it is
automatically recognized, but only at power-up. Select the current measuring
range by pressing B. If the secondary of a current transformer is being
measured, it is possible to display the current in terms of the primary by
entering a CT ratio into the current probe setting.
Use 21 to select transformer ratio
Use 4 5 to enter the ratio
16
edx013.bmp