I/O Modules; Blackdiamond Bdxa-10G48X I/O Module - Extreme Networks BlackDiamond X8 Series Hardware Installation Manual

Hide thumbs Also See for BlackDiamond X8 Series:
Table of Contents

Advertisement

I/O Modules

The following I/O modules are available for the BlackDiamond X8 switch:
BDXA-10G48X
BDXA-40G24X
BDXA-40G12X
No configuration information is stored on the I/O modules; all configuration information is stored on
the management modules.
When a BlackDiamond X8 series switch is powered on, the software generates a default configuration
for any slots that contain I/O modules. The default configuration allows the I/O module ports to
participate in the VLAN named default. The default configuration for the I/O module is not preserved
unless you explicitly save the configuration to NVRAM.
You can configure parameters of an I/O module after it is installed, or preconfigure a slot for a certain
type of module and configuration. The preconfigured information is applied to the module after it is
inserted. If you preconfigure a slot for a specific module type and then insert a different type of module,
the inserted module reverts to its default configuration.
See the ExtremeXOS Concepts Guide and the ExtremeXOS Command Reference Guide for feature-specific
information related to BlackDiamond X8 series modules.

BlackDiamond BDXA-10G48X I/O Module

The BDXA-10G48X I/O module
Figure 4: BDXA-10G48X I/O Module
1 = 10-gigabit Ethernet ports
2 = LEDs
In the default configuration for the BDXA-10G48X module, all ports:
Are added to the default VLAN as untagged.
Inherit the properties of the default VLAN (for example, protocol type and VLAN ID).
The BDXA-10G48X module has the following LEDs:
Module status (STAT)
Module diagnostics (DIAG)
Port status
For information about the LEDs and their activity on the BDXA-10G48X modules, see
LEDs" on page
24. For information about the SFP+ modules, see the Extreme Networks Pluggable Interface
Modules Installation Guide.
BlackDiamond X8 Series Switches Hardware Installation Guide
(Figure
4) has 48 unpopulated SFP+-based 10-gigabit Ethernet ports.
I/O Modules
"I/O Module
21

Advertisement

Table of Contents
loading

Table of Contents