Extreme Networks BlackDiamond X8 Series Hardware Installation Manual page 80

Chapter 7: BlackDiamond X8 Maintenance Procedures
c Carefully slide the module out of the switch chassis
surface.
Figure 45: Removing a Fabric Module
4 Install the replacement fabric module:
a Remove the module from the antistatic packaging.
a Loosen the screws on the insertion/extraction levers and open the levers.
b Align the circuit board with the guides at the top and bottom of the chassis and slide the module
into the chassis (Figure
80
46).
BlackDiamond X8 Series Switches Hardware Installation Guide
(Figure 45) and set it aside on an anti-static