Upgrading The Hard Disk Drive(S) - EUROCOM Multimedia PC User Manual

Upgrading the Hard Disk Drive(s)

The hard disk drive(s) can be taken out to accommodate other 3.5" serial (SATA)
hard disk drives with a height of 26mm (h) (see
1. Turn the computer off and disconnect all peripherals and cables (including tele-
phone lines).
2. Place the computer on a flat stable surface, preferably on a protective covering to
avoid damage to the LCD screen.
3. Locate the hard disk bay cover and remove screw
hard disk you want to replace.
4. Remove the hard disk cover(s) by sliding it(them) in the direction of arrow
1
"Storage" on page D -
3
3).
/ , depending on which
1 2
.
3
3
2
Upgrading the Hard Disk Drive(s) 6 - 3
Upgrading The Computer
HDD System
Warning
New HDD's are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
Figure 6 - 1
Hard Disk Bay &
Screws
6