Upgrading The Hard Disk Drive - EUROCOM Multimedia PC User Manual

Upgrading The Computer
HDD System
Warning
New HDD's are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
6
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
Figure 6 - 5
Hard Disk Screws

6 - 6 Upgrading the Hard Disk Drive

Upgrading the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard
disk drives with a height of 9.5mm (h) (see
operating system's installation instructions, and install all necessary drivers and util-
ities (as outlined in "Driver Installation" on page 4 -
disk.
1. Remove the rear cover (see
2. Remove screws -
1
Hard Disk Slot
Make sure you install the hard disk
into the lower slot on the main-
board.
"Storage" on page C -
"Removing the Rear Top Cover" on page 6 -
.
3
3). Follow your
2), when setting up a new hard
1
2
3).
3