EUROCOM Multimedia PC User Manual page 190

Windows XP Information
6. Press Enter and select the Strip Size (best set to default).
7. Press Enter and select the Capacity size (best set to default).
8. Press Enter to Create Volume.
9. Confirm the selection by pressing Y.
10. This will now return to the main menu.
11. Select 4.Exit and press Enter, then press Y to exit the RAID configuration menu.
E
E - 48 Setting Up SATA RAID or AHCI Modes
Intel(R) Matrix Storage Manager option ROM v6.0.0.1022 ICH8R wRAID5
Copyright (C) 2003-06 Intel Corporation. All Rights Reserved.
[ MAIN MENU
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
ID Name Level
1 My RAID RAID0(Stripe)
Physical Disks:
Port Drive Model Serial #
1 HDT722516DLA380 VDK71GTE17AH6K
4 ST380811AS 5PS196TS
[ ]-Select [ESC]-Exit
Figure E - 28
]
Strip Size Status
128KB 149.1GB Normal
Size Type/Status(Vol ID)
153.4GB Member Disk(0)
74.5GB Member Disk(0)
[ENTER]-Select Menu
- RAID Created
Bootable
Yes