Upgrading The Optical Device (Model A) - EUROCOM LCD PC User Manual

Upgrading The Computer
5
Figure 5 - 8
Rear Case Screws

5 - 8 Upgrading the Optical Device (Model A)

Upgrading the Optical Device (Model A)
1. Unplug the power cord and disconnect all peripheral cables (including the phone
line) from the computer.
2. Turn off the computer.
3. Place the computer with its LCD display facing down on a clean, dry, level surface.
4. Remove screws -
1
1
11
9
10
from the rear of the computer.
11
2 3
8
4
5
7
6