The Setup Program; Entering Setup - EUROCOM LCD PC User Manual

BIOS Utilities

The Setup Program

The PhoenixBIOS Setup Utility tells the system how to configure itself and man-
age basic features and subsystems (e.g. port configuration).

Entering Setup

4
To enter the PhoenixBIOS Setup Utility, turn on the computer and press F2 dur-
ing the POST. The prompt (Press F2 to Enter Setup) seen in Figure 4 - 1 is usu-
ally present for a few seconds after you turn on the system. If you get a "Keyboard
Error", (usually because you pressed F2 too quickly) just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combination
and then hold down F2 when prompted. The PhoenixBIOS Setup Utility main
menu will appear.
4 - 4 The Setup Program