Download Print this page

Samsung LN-T4066F Owner's Instructions Manual page 9

Tft-lcd television
Hide thumbs Also See for LN-T4066F:

Advertisement

Available languages

Available languages

Connecting Cable TV
To connect to a cable TV system, follow the instructions below
Cable without a Cable Box
1.
Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.
_'_Because thisTV is cable-ready, you do_otneeda cableboxto viewunscrambled c ablechannels
Connectina
to a Cable Box that Descrambles
All Channels
1,
Find the cable that is connected to the ANT OUT terminal on your cable box
Thisterminalmightbe labeled"ANTOUT","VHFOUT"or simply, " OUT'r
2.
Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV
]
ANT IN
ANT OUT I_-
/
Connectina
to a Cable Box that Descrambles
Some Channels
If your cable box descrambles only some channels (suchas premium channels), follow the instructions below You will need a two-
way splitter, an RF (AtB) switch, and four lengths of RF cane (These items are available at most electronics stores)
"1, Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box
>'_This terminal m ightbe labeled"ANTIN",
'VHF IN"or simply,"IN"
2,
Connect this cable to a two-way splitter
Bncom_ng
c_b{e
Splitter
3,
Connect an RF cable between the OUTPUT
terminal on the splitter and the iN terminal
on the cable box.
fneomtng
¢abte
C_ble Box
4,
Connect an RF cable between the
ANT OUT terminal on the cable box and
the B-IN terminal on the RF(AiB) switch
Incoming
cable
Cable
Box
Switch
5, Connect another cable between the other
OUT terminal on the splitter and the A-IN
terminal on the RF (AJB) switch.
6,
Connect the last RF cable between the
OUT terminal on the RF (A_B) switch and
the ANT IN terminal on the rear of the TV
I_corn_ng
Splitter
_
-- _
RF (,Crib t
C_bFe8o×
Switch
q
-_
_
_
ANTIN
/
/
TV Rear
C_b{e Box
Switch
J
After you have made this connection, setthe A,B sw_tch to the "A" position for normalviewing. Set the A,B switchto the "B" position to
vie\_'scrambled channels (When you set the A'B switchto "B", you will need to tune your TV to the cable box's outputchannel, which is
usuallychannel 3 or 4.)

Advertisement

loading