Samsung LN-T4066F Owner's Instructions Manual page 65

Setting the Light Effect
You can turn on/oft the blue LED on the front of TV
1. Press the MENU button to display the menu.
Press the • or • buttons to select "Setup", then press the ENTER button.
2. Press the • or • buttons to select "Light Effect", then press the ENTER
button.
3. Press the • or • button to select "OFF', " In Standby", "in Watching TV" or "Always",
then press the ENTER button.
!n Watching TV: Turns the LED on whi!e watching 37/;
_ A!waya: LED _i!l €o_ c,nafter you turn th_ _ Off
Press the EXIT button to exit
Upgrading the Software
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-80O-SAMSUNG
(726-7664) to receive information about downloading upgrades and using a USB drive Upgrades will be possible by connecting a
USB drive to the USB port located on located on the side of your TV
1, Insert a USS drive containing the firmware upgrade into the WISELINK port on
the side of the TV
2, Press the MENU button to display the menu
Press the • or • button to select Setup, then press the ENTER button
3. Press the • or • button to select Software upgrade, then press the ENTER button
TV Side Panel
USB Drive
4, Press the • or • button to select USB Upgrade, then press the ENTER button
The message Scanning for USS It may take up to 30 seconds is displayed
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied The TV will shut oft and turn on automatically after
completing the firm_vare upgrade Please check the firmware version after the
upgrades are complete