Samsung LN-T4066F Owner's Instructions Manual page 24

To Select the Source
Use to select TV or other external input sources connected to the TV
Use to select the input source of your choice
1. Press the MENU button to display the menu.
Press theA or • buttons to select "input", then press the ENTER button.
2. Press the ENTER button to select "Source List".
Press the • or • buttons to select signal source, then press the ENTER button.
When you connect equipment to the LCD, you can choose between the
following sets of jacks: TV. AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI!, HDMi2, HDMI3 on the TV's rear panel
"_ HDMI1, HDMt2, HDMt3 inputcan only be selected when the externat device is
turned on and connected via HDMI
"," AV2iS-Video2,,HDMI3 is located on the side of the TV
You can choose only those external devices that are connected to the TV
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1, Press the MENU button to display the menu.
Press the• or • buttons to select 'input", then press the ENTER button.
Press the • or • buttons to select "Edit Name", then press the ENTER button.
2. Press the • or • buttons to select "AVI", "AV2", "S-Video1", "S-Video2",
"Component1", "Component2", "PC". "HDMIt", "HDMI2", "HDMI3" input jack, then
press the ENTER button
3, Press the • or • buttons to select "VCR", "DVD", "D-VHS", "Cable STB",
"HD STB", "Satellite STB", "PVR STB", "AV Receiver". "DVD Receiver",
"Game", "Camcorder". "DVD Combo", "PC", "VOD STB", "TV" input source, then
press the ENTER button
Press the EXIT button to exit