Samsung LN-T4066F Owner's Instructions Manual page 25

Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings CDynamic", "Standard". "Movie") that are preset at tile factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu
1, Press the MENU button to display the menu.
Press the ENTER button, to select "Picture"
2, Press the ENTER button to select "Mode"
Press the • or • buttons to select the "Dynamic", "Standard", "Movie" picture
setting Press the ENTER button
* c_oos_Mo'4e fora_ai_al!inage withou_ #cturee_hancernents
3, Press the • or • buttons to select "Contrast", "Brightness", "Sharpness",
"Color". or "Tint(G/R)", then press the ENTER button.
4, Press the _ or • buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the • button increases it
Press the ENTER button
Press the EXIT button to exit.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint(GiR)
the OSD will be adjusted accordingly.
• When in PC mode, Tint, Sharpness, and Color are not available
[51Press the P,MODE button on the remote control repeatedly to select the desired
picture mode.