Samsung LN-T4066F Owner's Instructions Manual page 18

Storina Channels in Memory tAutomatic Methodl
1, Press the MENU button to display the menu
Press the • or • buttons to select"Channel", then press the ENTER button
2, Press the • or • buttons to select "Auto Program", then press the ENTER button.
3, Press the • or • buttons to select the antenna connection, then press the
ENTER button
>Air: "Air" antenna signal ! Cable: 'Cable" antenna signal /
Air+Cable: "Air" and "Cable" antenna signals
4, When selecting the Cable TV system : Press the ENTER button to start the auto
program By default, the cable TV system is set to "STD" If you want to select
another type of cable system, press the • or • button to select
"STD", "HRC" or "IRC"
STD, HRC and IRC identif_ various types of cable TV systems Contact your
local cable company to identifythe type of cable system that exists in your
particular area At this point the signal source has been selected
Press the ENTER button to start the auto program
>To stop the search before it has finished, press the ENTER button with stop
selected
5, After all the available channels are stored, the 'Auto Program" menu reappears
Press the EXIT button to exit