Samsung LN-T4066F Owner's Instructions Manual page 47

Setting up the TV with your PC
How to Auto Adiust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions
This function does not work in DVI-DigitaI mode
1, Press the MENU button to display the menu
Press the • or • buttons to select "Setup", then press the ENTER button
Press the • or • buttons to select "PC", then press the ENTER button
_'-Change to the PC mode first.
2, Press the • or • buttons to select "AutoAdjustment", then press the ENTER button
Press the EXIT button to exit.
Adiustine the Screen Qua]itv
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then do the frequency adjustments to the utmost and fine tune again(See page 44) After the noise has been reduced.
re-adjust the picture so that it is aligned on the center of the screen
1, Press the MENU button to display the menu
Press the • or • buttons to select "Setup", then press the ENTER button
Press the • or • buttons to select "PC", then press the ENTER button
Change to the PC mode first
2, Press the ENTER button to select "Image Lock"
3, Press the • or • buttons to select "Coarse"or "Fine",then press the ENTER button
Press the _I or I_ buttons to adjust the screen quality
>- Vertical stripes may appear or the picture may be blurry
Press the ENTER button
Press the EXIT button to exit.