Samsung LN-T4066F Owner's Instructions Manual page 84

Problem Possible Solution
Horizontal bars aaoear to flicke- Adjust the Coarse tuning and then ad Jst the Fine tuning
. _er or snll:qmer on me i_qage.
/erttcal bars aDoear to flicker. ,_ajust the Coarse tuning and then ad Jst the Fine tuning
. tter or shimmer on the image.
Screen is black and Dower On your computer check: Power Signal Cable
lalca_or lJgn[DIJRKS s_eaa , The TV is using i[s power management sys[em
Move the comeu[er s mouse or press any key on the KeyDoara
mage is no[ s[aole ana may
appear to vibrate when
yOU
nave
a comauter connected to the PC
input.
mage is no[ cen_erea on me
screen
If a still image_sals#ayed for
an ex[enaed_erlodof time reslaua
imagesor blurringmay appear.
f the setting is nol correct use your computer uhtity program to cnange the display settings
Your TV sur_oorts multiscan display functions within the following frequency domain:
Horizontal frequency (kHz) 30~60
/ertical frequency t_z/ 60~75
PC Maximum refresh rate
1920 X 1080
at 60 Hz_
AdjUStthe norlzonta_ aria vertlca 3ost_ton
The screen nosJtJonmust De aajusted on the ou[out source (i.e STB) with a digital signal
When. ou neea to Eeaveine monitor unused for an extended period of time, adjust the
set[ings so that the mon_tor automat_ca y goes into energy savfnc mode or activates the
screen saver to alsplay i_qovlngimages
The TFT LCD oanel uses a aane_consisting of sub pixeis (3,147,264) which reaulre soonlsl,calea [ecnnology to produce. How-
ever mere may be few bflght or dark pixeis on the screen. These plxels w*ll nave no tmDac[ on me performance of the product.