Samsung LN-T4066F Owner's Instructions Manual page 33

Viewing Picture-in-Picture
This product has one built-in tune[ which does not allow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen, and a different one in the PiP screen Please see 'PIP Settings'below for detaileds You can use the
PfP feature to simultaneously watch two video sources (See page 38 to select the PIP picture sound.)
While V-Chip (See page 56) is in operation, the PIP function cannot be used
While xvYCC (See page 27) is in operation, the PiP function cannot be used.
Activatina Picture-in-Picture
1, Press the MENU button to display the menu.
Press the • or • buttons to select "Setup", then press the ENTER button.
Press the • or • buttons to select "PIP", then press the ENTER button
2, Press the ENTER button again
Press the• or • buttons to select "On", then press the ENTER button
-_ if you turn the TV off while watching in PIP mode and turn it on again, the PiP
window win disappear
You can view Analog TV broadcasts on the PiP screen (sub-picture) when the
main picture is from an external device connected to HDMtt,2,3,
Component1,2, or PC
Main picture Sub picture
Component 1,2
HDMI 1,2,3 Analog TV broadcasts only
PC
AJternately, y ou can press the PIP button on the remote control repeatedlyto activate or _H ct._10N
deactivate the PiP [_ _. _
Chanaina the PIP Channel
3, Press the • or • buttons to select "Channel', then press the ENTER button
Press the • or • buttons to select the desired channel in the PIP window
Press the ENTER buttons
MAIN: PC / HDM_ 1,2,3 Component 1,2
PIP: TV(Analog)
_'-The channel can be active when the sub picture is set to TV
_, Press the PiP Channel buttons on the remote control
SLEF2 _r_
CC]