Loading Media; How Do I Load Media; Tray 1 (Multipurpose Tray) - Epson Aculaser C1600 User Manual

Loading Media

How do I load media?

Take off the top and bottom sheets of a ream of paper. Holding a stack of approximately 200 sheets at a
time, fan the stack to prevent static buildup before inserting it in a tray.
Note:
Although this printer was designed for printing on a wide range of media types, it is not intended to print
exclusively on a single media type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, labels, or thick stock) may adversely affect print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it with the new media, even
the edges, then reload it.
Do not mix media of different types and sizes, as this will cause media misfeeds.

Tray 1 (Multipurpose Tray)

For details on the types and sizes of media that can be printed from Tray 1, refer to "Print Media" on
page 25.
AcuLaser C1600 User's Guide
Media Handling 34