Epson Aculaser C1600 User Manual page 23

Transfer Power—Adjust the 2nd transfer voltage for each media type. If there are cracks in solid parts
of the image, move the setting in the + direction.
If small white dots appear in halftones, move the setting in the - direction.
Service's Choice
❏ GDI Timeout—Specifies the amount of time until communication with the printer times out.
❏ Energy Save—Specifies whether or not the Energy Save mode is enabled. The length of time
until the machine enters Energy Save mode can be specified from the Panel tab.
Note:
This menu is displayed only on the Americas model.
Flicker—Select a mode for preventing flickering of the fluorescent lamp, depending on the power
source.
0: Prevents flickering automatically
1: Normally prevents flickering
2: Does not prevent flickering
Image Adj Param—Use when print quality is reduced in environments such as high altitudes.
0: Used at standard elevations
1: Used at medium-high elevations
2: Used at high elevations (about 2,000 m)
3: Used at extremely high elevations
Image Refresh—Use when thin white horizontal lines appear at intervals on images.
Note:
The Image Refresh function consumes toner.
Print Pattern 1, Print Pattern 2—Prints a test pattern so the print result can be checked.
A black-and-white test pattern can be printed with "Print Pattern 1", and a color test pattern can be
printed with "Print Pattern 2".
AcuLaser C1600 User's Guide
Remote Panel Program 23