Epson Aculaser C1600 User Manual page 71

Ready Error
indicator indicator
(green) (orange)
Off On
Off On
Off On
Slow Slow
blinking blinking
Slow blinking alternately
Off Slow
blinking
Display of
Toner
indicator Remote
(orange) Panel
Program
On NOT
INSTALLED
TONER /
CHECK X
(YMCK)
TONER
TONER LIFE
END
Blinking WRONG
TONER X
(YMCK)
Rapid NON
blinking GENUINE
TONER X
(YMCK)
* CHECK TRAY
PAPER /
LOAD
PAPER (XX)
* PAPER SIZE
ERROR /
RESET
PAPER (XX)
* MEMORY
FULL
AcuLaser C1600
Condition Action
The toner cartridge is Install the all toner
not installed. cartridges.
Toner empty Replace the toner
cartridge.
An unapproved toner Install a correct toner
cartridge is installed. cartridge.
The installed toner Install a Epson toner
cartridge is of an cartridge of the
unapproved type. appropriate type.
See "About Toner
Cartridges" on page 38.
Press the Clear key to
clear the indicator
message.
Media empty Load media into Tray 1.
Media size error Press the Clear key to
cancel the error.
The size of paper being
printed on is different To print on paper of the
from the size of paper size specified in the
specified in the printer printer driver, load
driver. paper of the correct size
into Tray 1, and then try
performing the print job
again.
Memory full Press the Clear key.
If the error is not
corrected, turn off the
printer. After a few
seconds, turn on the
printer.
User's Guide
Troubleshooting 71