Epson Aculaser C1600 User Manual page 85

Symptom Cause
Image is too dark. One or more of the toner
cartridges may be defective.
The photoconductor unit may
be defective.
Image is blurred; One or more of the toner
background is cartridges may be defective.
lightly stained;
The photoconductor unit may
there is insufficient
be defective.
gloss of the
printed image.
The print or color One or more of the toner
density is uneven. cartridges may be defective or
low.
The photoconductor unit is
defective.
The printer is not level.
Irregular print or The media is moist from
mottled image humidity.
appears.
Unsupported media (wrong size,
thickness, type, etc.) is being
used.
One or more of the toner
cartridges may be defective.
The photoconductor unit is
defective.
Solution
Remove the toner cartridges and check for damage. If it is
damaged, replace it.
Remove the photoconductor unit and check for damage. If it
is damaged, replace it.
Remove the toner cartridges and check for damage. If it is
damaged, replace it.
Remove the photoconductor unit and check for damage. If it
is damaged, replace it.
Remove the toner cartridges and check for damage. If it is
damaged, replace it.
Remove the photoconductor unit and check for damage. If it
is damaged, replace it.
Place the printer on a flat, hard, level surface.
Adjust the humidity in the media storage area.
Remove the moist media and replace it with new, dry media.
Use Epson-approved media. See "Print Media" on page 25.
Remove the toner cartridges and check for damage. If it is
damaged, replace it.
Remove the photoconductor unit and check for damage. If it
is damaged, replace it.
AcuLaser C1600 User's Guide
Troubleshooting 85