Epson Aculaser C1600 User Manual page 40

Note:
If Toner Out Stop on the Panel tab of the Remote Panel Program is set to Off, printing can continue even
after the message "TONER OUT X" has appeared in the status display box; however, the printing quality
cannot be guaranteed. If printing is continued and the toner becomes empty, the message "TONER LIFE
END" appears and printing stops.
For details on the settings, refer to "Using the Remote Panel Program" on page 20.
1. Check the control panel to see which color of toner is empty.
Note:
If the toner becomes empty, the toner indicator lights up and the empty toner cartridge is
automatically moved so that it can be replaced.
If you wish to change the toner cartridge, use either operation described below to switch the
printer to Change Toner mode.
❏ Press the Rotate Toner key.
❏ On the Panel tab of the Remote Panel Program, select Change Toner, and then click the
Rotate Toner button.
Note:
❏ The printer enters Change Toner mode, and the magenta toner indicator lights up.
❏ With each additional press of the Rotate Toner key, the cyan, black, then yellow toner cartridge
moves so that they can be replaced. The indicator for the toner cartridge that was moved so that it
can be replaced lights up.
❏ To exit Change Toner mode, press the Clear key.
2. Open the front cover.
AcuLaser C1600 User's Guide
Replacing Consumables 40