Epson Aculaser C1600 User Manual page 22

❏ Apply—Click to send the settings specified for "Toner Low Message", "Toner Out Stop",
"Energy Save Time" and "Auto Continue" to the printer.
❏ Toner Low Message—Specifies whether a printer indicator blinks or a warning message
appears in the status display box of the Remote Panel Program when toner is about to run out.
If Off is selected, neither of these notifications appear when the toner is about to run out.
❏ Toner Out Stop—Specifies whether or not printing stops when the toner becomes empty.
If Off is selected, printing can continue even if toner has run out.
However, the printing results are not guaranteed. If printing is continued, the Error indicator
(orange) lights up and printing stops.
❏ Energy Save Time—Set time to enter Energy Save mode when no operation is performed.
❏ Auto Continue—If Off is selected, the next print job will not be performed if a paper size error
occurred in the printer, unless the Clear key is pressed to cancel the error.
If On is selected, the next print job is sent if a paper size error occurred in the printer, the error
is automatically cancelled, and the next print job is performed.
Calibration
❏ Start—Performs the calibration operation.
Note:
The calibration function consumes toner.
User Service Tab
Note:
When the Remote Panel Program is started up again after is has been exited using the icon in the
Windows notification area (right end of the taskbar), the default settings will be displayed. Click the
Display Configuration Page button to view the actual settings, or click the Download button to
download the settings from the printer.
Top Adjustment—Allows the vertical print position to be finely adjusted.
Note:
Adjusting the position a single increment moves it 0.0079 inch (0.2 mm).
Left Adjustment—Allows the horizontal printer position to be finely adjusted.
Note:
Adjusting the position a single increment moves it 0.0079 inch (0.2 mm).
AcuLaser C1600 User's Guide
Remote Panel Program 22