Epson Aculaser C1600 User Manual page 69

Ready Error
indicator indicator
(green) (orange)
On Off
On Slow
blinking
On Slow
blinking
Display of
Toner
indicator Remote
(orange) Panel
Program
On TONER OUT
X (YMCK)
Rapid NON
Blinking GENUINE
TONER X
(YMCK)
* P/U LOW
* T/C
MEMORY
ERROR
* VIDEO I/F
ERROR
* PROCESS
CAUTION-ID
C
AcuLaser C1600
Condition Action
Toner out Replace the toner
cartridge.
Note:
This message appears Note:
when the Toner Out Printing can continue,
however, the printing
Stop in the Remote
Panel Program is set to results are not
guaranteed.
Off.
If printing is continued,
the Error indicator
(orange) lights up and
printing stops.
The installed toner Install a Epson toner
cartridge is of an cartridge of the
unapproved type. appropriate type.
See "About Toner
Cartridges" on page 38.
Photoconductor unit Prepare the new
near end photoconductor unit.
Toner cartridge memory Re-install the specified
error toner cartridge.
Video interface error Turn off the printer. After
a few seconds, turn on
the printer.
Process caution Open and close the
printer's covers.
If the error is not
corrected, turn off the
printer. After a few
seconds, turn on the
printer.
User's Guide
Troubleshooting 69