Epson Aculaser C1600 User Manual page 21

Panel Tab
Remote Panel
❏ Status—Allows the current status of the printer to be checked.
Note:
Since the status is not automatically detected with this utility, click the Status button to view the
most recent printer status.
❏ Display Configuration Page—Displays the configuration page. In addition, the contents of the
configuration page can be saved as an INI file.
❏ Rotate Toner—Click the button to switch the printer to the selected operation mode. The
following two modes are available.
❏ Change Toner:
Used when replacing a toner cartridge.
Select this mode, and then click the Rotate Toner button to switch the printer to the Change
Toner mode.
(Refer to "Replacing a Toner Cartridge" on page 39.)
❏ Eject All Toner:
Used when removing all toner cartridges.
Select this mode, and then click the Rotate Toner button to switch the printer to the Eject All
Toner mode.
(Refer to "Removing All Toner Cartridges" on page 45.)
❏ P/H Clean Up—Click the button to switch the printer to the P/H Clean Up mode.
Print Head Cleanup mode is a mode that allows the user to clean the print head window more
easily. The print head window is not cleaned automatically.
(Refer to "Cleaning the Print Head Window" on page 57.)
Note:
The printer can also be switched to any of these operation modes by pressing the Rotate Toner key on
the printer.
Refer to "About the Rotate Toner KEY" on page 11.
Set Default
Note:
When the Remote Panel Program is started up again after it has been exited using the icon in the
Windows notification area (right end of the taskbar), the default settings will be displayed. To view the
actual settings, click the Display Configuration Page button.
AcuLaser C1600 User's Guide
Remote Panel Program 21