Connecting Your Tv; Tv Only; Tv With Other Components - ProScan PS27125 User Manual

STEP 1
Unpack the TV. Make sure to locate the remote control and
Connections Foldout.
Important Stand Information
CAUTION: Matching stands were designed to be used with the table
model TV included in this book. The recommended stands are provided
with hardware to secure the TV to the stand so that it cannot be easily
pushed off, pulled off or tipped over. Your ProScan dealer can help you
choose the appropriate stand for your TV.
If you choose not to use the stand recommended for your TV, take
precautions that the stand or other furniture the TV is placed on is
properly located (see Important Safeguards sheet) and of adequate size
and strength to prevent the TV from accidentally being pushed off,
pulled off or tipped over. This could cause damage to the TV and or
personal injury.
STEP 2: CONNECTING YOUR
TV
If you're only going to connect the TV to your home antenna or cable
system, use the "TV Only" connection. If you're going to connect the
TV to a VCR, satellite receiver, DVD player or other component, look
at the Connections Foldout. The Connections Foldout details
recommended connection schemes for hooking up the TV to a cable
box or antenna, one or two VCRs, a laserdisc player, and a satellite
receiver.
TV ONLY
This is a basic connection from an antenna or cable system to your TV.
Connect the cable as shown. If you have a VCR or other components
to connect to the TV, skip to the next section.
TV
WITH OTHER COMPONENTS
Use the Connections Foldout to connect your TV to a VCR, DVD
player, and/or satellite receiver. After connecting your TV and other
components, proceed to the next step. See Appendix A for detailed
information about using each of these connections.
CABLE, CABLE BOX, OR ANTENNA
AN_NNA
TV Only Connection
•
4