Table of Contents
Advertisement
Caution
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord.
This unit must follow the national requirement and local state laws to
dispose unit.
Before connecting the cables to your Elo touchcomputer, make
sure all components are powered OFF.
Only approved components complying with IEC 60601-1 series can be
connected to 15MX/19MX Touchcomputer for Healthcare Applications in
Patient Environment. The use of ACCESSORY equipment not complying
with the equivalent safety requirements of this equipment may lead to a
reduced safety of the resulting system. Consideration relating to the
choices of accessory equipment should include: Use of accessory in the
patient environment.· Evidence that the safety certification of the
accessory has been performed in accordance to the appropriate IEC
60601-1 and/or IEC 60601-1-1 harmonized national standard.
For continued safety
•
This unit only complies to the above standards if used with a
medical grade power cord.
•
A medical grade power supply, such as the one specified, is
required for use in a medical application.
Please do not touch the patient and the touchcomputer output
connecter at the same time.
The touchmonitor is to be used with following adaptor:
1. XP Power / AHM85PS12
or
2. Elo Touch Solutions / FSP110-RAAM
Disposing of your old product
Within the European Union
EU-wide legislation, as implemented in each Member State, requires that
waste electrical and electronic products carrying the mark (left) must be
disposed of separately from normal household waste. This includes monitors
and electrical accessories, such as signal cables or power cords. When you
need to dispose of your display products, please follow the guidance of your
local authority, or ask the shop where you purchased the product, or if
applicable, follow any agreements made between yourself and the supplier of
this product.
The mark on electrical and electronic products only applies to the current
European Union Member States.
Elo Touch Solutions recommends that after its useful life (or after sustaining
unrepairable damage), customers dispose of the touchcomputer and its power
supply in an environmentally sound manner. Acceptable methods include the
reuse of parts or whole products and the recycling of products, components,
and materials. Please consult and obey national, state, and local laws and
ordinances governing the safe disposal of electronic equipment.
M-Series Touchcomputer User Guide v
Advertisement
Table of Contents
