Chapter 3 - Touchmonitor Installation - Elo TouchSystems ET3201L User Manual

Chapter 3 - Touchmonitor Installation

Connector Panel & Interfaces
Remove the cable cover on the bottom rear (when viewed in landscape orientation) to access
the touchmonitors connector panel.
Pictures of the connector panel and interfaces. The OSD connection is in red.
Touchmonitor Connections to an External Computer
1. Connect the HDMI cable between the monitor and the video source.
2. Connect the USB touch cable between the monitor and the PC.
3. Connect the remote On-screen Display (OSD) via the remote OSD connector seen in red
above
4. Select the correct power cable for your region. Connect it between the AC power source
and the touchmonitors POWER IN connector.
5. The touchmonitor ships in an ON state. Use the remote OSD to access the On Screen
Display Menu.
3201L/4201L/7001L
Images of monitor back I/O ports with OSD remote
User Manual– Interactive Digital Signage
SW601990 Rev A, Page 7 of 32