Elo TouchSystems ET3201L User Manual page 11

Operating System Setup
®
Windows 7 Operating Systems
The initial setup of the operating system takes approximately 5 minutes. Additional time might
be needed for different touchcomputer hardware and operating system configurations. You will
need to connect an external mouse and/or keyboard into the Computer Module connector panel
to execute these steps.
To set up the Windows 7 for the Computer Module, turn on the touchcomputer and follow the
instructions on the screen.
Selecting the Language
Windows uses English as the default language in menus and dialog boxes. You can change this
language to suit your preference.
Click Customize. The "Regional and Language Options" window appears. Select the
Languages tab. If required, check the boxes for "Install files for complex script and right-to-left
languages" and "Install files for East Asian languages."
Select the "Regional Options" tab. Select your preferred language from the drop-down list in
the Standards and Formats pane.
Select your location from the drop-down list in the Locations pane. Click Apply, and then OK.
Choosing the computer name
You will be prompted to enter the computers name.
Choosing the Windows Update settings
You will be prompted to select the Windows Update settings.
Selecting the Time Zone
When the following window appears, you can change the Computer Modules time zone, date,
and time. After making any changes, click Next to finish. Windows Setup completes the OS
installation.
User Manual– Interactive Digital Signage
SW601990 Rev A, Page 11 of 32