Elo TouchSystems ET3201L User Manual page 22

Selects which audio source is heard over the monitors. The volume can be muted and
unmated. Also the level of the volume can be changed from 0 – 100. Default: 50
If there is no Computer Module plugged in, and the video source is HDMI, the options
are: Line In and HDMI.
Default: Line In.
Audio Setting
If there is no Computer Module plugged in, and the video source is VGA, the only
option is Line In.
If a Computer Module is plugged in (and therefore the input video is Computer Module
HDMI), the options are: Elo Computer Module HDMI, Elo Computer Module Line In,
and Line In.
Default: Elo Computer Module HDMI.
Standard, Movie, Gaming, Photo modes can be chosen depending on the users
Color
preference.
Preference
Default: Photo
OSD menu: The Horizontal position, vertical position, OSD rotation and OSD timer
can be changed from here.
Language Settings can be changed
Recall Defaults: set the system back to the preset standards
Information: display information about the monitor and system
Other Settings MDC Protocol: allows the user to choose between IIC and RS232 mode for the MDC
utility
Support & Help: Provide information about help and support
System Temperature: Provides the system Temperature information. If the Elo
computer module is inserted, there will be a secondary line showing that temperature
information.
All touchmonitor adjustments made through the OSD are automatically memorized as soon as
they are entered. This feature saves you from having to reset your choices every time the
touchmonitor is unplugged or powered off and on. If there is a power failure, the touchmonitor
settings will not default to the factory specifications.
OSD and Power Lockouts
Press and hold the "Menu" and "<" buttons for two seconds to enable/disable the OSD Locking
feature. When the OSD Locking is enabled, pressing any of the Menu, Up, Down, or Select
keys will have no effect on the system.
Press and hold the "Menu" and ">" buttons for two seconds to enable/disable the Power
Locking feature. When the Power Locking is enabled, pressing the power switch will have no
effect on the system.
User Manual– Interactive Digital Signage
SW601990 Rev A, Page 22 of 32