22 something not working
Something not working
The dishwasher will not start or stops during operation.
Certain problems are due to the lack of simple maintenance or oversights,
which can be solved with the help of the indications described in the chart,
without calling out a service technician.
Switch off the dishwasher and carry out the following suggested corrective
actions.
Fault code
continuous flashing
●
of the light of the
running program
1 flash of the
●
READY indicator
light
continuous flashing
●
of the light of the
running program
2 flashes of the
●
READY indicator
light
Malfunction
The dishwasher
does not fill with
water
The dishwasher will
not drain
Possible cause
The water tap is
●
blocked or furred
with limescale
The water tap is
●
turned off
The filter (where
●
present) in the
threaded hose
fitting at the water
inlet valve is
blocked
The water inlet
●
hose has not been
correctly laid or it
is bent or
squashed
The sink spigot is
●
blocked
The water drain
●
hose has not been
correctly laid or it
is bent or
squashed
Solution
Clean the water
●
tap
Turn the water tap
●
on
Clean the filter in
●
the threaded hose
Check the water
●
inlet hose
connection
Clean out the sink
●
spigot
Check the water
●
drain hose
connection