TROUBLESHOOTING
TROUBLE CODE
Start/
Wash
End
Pause
POSSIBLE FAULT
Insufficient water
Continuous water input
Inability to discharge water
Faulty heater and heater sensor
Overflow
Faulty electronic card
WHAT TO DO
Make sure the water inlet tap is open and
water is flowing.
Separate the inlet hose from the tap and clean
the filter of the hose.
Contact for service if the error continues.
Close the tap and contact for service.
Water discharge hose and filters may be
clogged.
Cancel the program.
If the error continues, contact for service.
Contact for service.
Contact for service.
Unplug the machine and close the tap.
Contact for service.
Contact for service.
TROUBLESHOOTING
20