Westinghouse SB908 User Manual page 23

Fault code
Once these checks have been carried
out, switch on the appliance: the
program will continue from the point at
which it was interrupted.
If the malfunction or fault code
reappears or for other fault codes not
described in the above chart, please
contact your Customer Care Centre,
quoting the model (Mod.), product
number (PNC) and serial number
(S.N.).
This information can be found on the
rating plate located on the side of the
dishwasher door.
Malfunction
The program does
not start
something not working 23
Possible cause
The dishwasher
●
door has not been
properly closed
The main plug is
●
not plugged in
The fuse has
●
blown out in the
household fuse
box
Delay start has
●
been set
So that you always have these
numbers at hand, we recommend you
note them here:
Mod. :. . . . . . . . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . . .
Solution
Close the door
●
Insert the main
●
plug
Replace the fuse
●
If dishes are to be
●
washed
immediately,
cancel the delay
start